The AUTO-SCAN function automatically searches for the existing control units and automatically shows whether an error is present. This means that you do not need to select each control unit laboriously and time-consuming, the device does it automatically!
All common vehicle makes and models are supported.
Functionality
Read and delete error codes in all available systems of the vehicle
Display live data as text, graphic or analog for easy data verification
Auto VIN technology can automatically identify the vehicle's make, model and year information in a very short time. The unit reads and decodes the VIN fully automatically.
Move electronic parking brake to maintenance position and close again after repair and calibrate when needed.
Immobilizer/key functions for div. brands
Support of DPF regeneration
Coding of injectors after exchange
Teach steering angle sensor (SAS)
Reset oil and service intervals
Teach-in of the RDK sensors
Battery registration and reset of BMS values
Throttle valve teach-in
For certain brands the following additional functions are available
Brake bleeding
Calibrate wheel suspension
Adjust odometer
Change language
Adjust headlights
Change tire size
Scope of delivery
Autel MaxiDAS DS808 BT device
Case for storage
Set of adapter cables for older vehicles
OBD Bluetooth diagnostic adapter
USB cable
Power supply
Printed manual
Quick start guide
Menu German and English, switchable under settings
2 years manufacturer warranty
1 year updates included
Technical data
Recommended to use interior
Operating system Android™ 4.4.4
Processor Cortex-A9 processor (1.5 GHz)
Memory 32GB
Display 7-inch LCD capacitive touch screen with 1024x600 resolution
Connections - Mini USB 2.0 - USB 2.0 - WLAN - Micro SD card (supports up to 32GB)
Sensors - Ambient light sensor to automatically adjust the brightness of the display
Audio in/out - Input: not available - Output: buzzer
Power and Battery - 3.7 V/3200 mAh Lithium Polymer Battery - Charging via 5 V AC adapter
Battery life Approx. 4.5 hours of continuous work
Battery charging input 5 V/1.5 A
Current consumption 500 mA (LCD at standard brightness, WLAN on) @3.7 V
Operating temperature -10 to 60°C
Storage temperature -20 to 70°C
Operating humidity 5% - 95% non-condensed
Size (W x H x D) 237.8 mm (9.4") x 148.6 mm (5.9") x 35.5 mm (1.4")
Net weight 788 g
Supported Protocols ISO9141-2, ISO14230-2,ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, ISO11898(Highspeed, Middlespeed, Lowspeed and Singlewire CAN, fault-tolerant CAN), SAE J2610,GM UART,UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6
Translated with www.DeepL.com/Translator (free version)