AutoFlasher Full Master

• ECU/TCU-Protocols
• Engine & transmission control units
• Clone
• Comprehensive guide
• OBD, Bench, Bootloader, JTAG, AUD, or BDM Mode
• (cars, motorcycles, trucks, commercial vehicles, boats)

Our Autoflasher is the perfect choice if you want to individually optimise thousands of vehicles according to your ideas directly via the OBD socket. In addition to classic vehicle tuning, minor modifications can also be carried out, updated software can be imported or a complete reprogramming can be carried out. All you need is our flasher device and an intact internet connection.

In addition, our Autoflasher allows more complex repair work via OBD, Bench, Bootloader, JTAG, AUD, or BDM mode. With our included cables, you can also easily find communication and connection errors and solve them in record time.

The all-rounder

1 device: many functions.
Our Autoflasher can do all this

Read and write function

Due to its high compatibility, our Autoflasher can be used to read and write to all common engine and transmission control units. 

Back to the original 

With this function, many ECUs can not only be restored to their original state, but you can also downgrade or upgrade the current data state.

Checksum calculation

You save yourself the manual calculation of the checksums. The Autoflasher takes over this task for you and adapts the values if necessary. 

Error Goodbye

Existing error codes are found by our Autoflasher via the OBD-2 socket and removed automatically directly after writing the tuning file. You do not need to do this separately

Log vehicle data

For almost every ECU, numerous and specific parameters are included, such as ignition, boost pressure, lambda values and many more, to provide really good information.

OBD Flash & ECU detection

We are approaching the 30,000 logs mark by leaps and bounds, and new ones are added almost every day. Therefore, with our tool you work very effectively and don't lose any time. For even greater convenience, we have programmed our tool to recognize incorrectly selected ECUs and set the appropriate protocol without manual intervention. 

Bench Flash

For some ECUs, the additional removal of the ECU is necessary. We supply in our Autoflasher case all the necessary content that the ECU can be removed comfortably, whose connection is on the pins on the connector. Thanks to modern technology, for some years now, no more cumbersome opening of the ECU is required

ECU & TCU Cloning

Autoflasher can do more than just increase performance. The tool has a true full-backup method and thus allows a complete relearn, which raises the services in terms of support and ECU repair to a whole new level. 

Boot Flash

Occasionally, there are still ECUs where neither OBD nor Bench method are used. These ECUs, which only make up a small fraction, can only be processed accordingly after opening the ECU. With the boot flash method, the connection is made on the circuit board

The support is in english language.